Deploy alongside your existing infrastructure
Your infrastructure is the foundation. We add the intelligence.
Your Schneider PowerLogic panels, Eaton EPMS meters, and DCIM dashboards work well for what they were designed to do: steady-state power monitoring at 1 Hz intervals, capacity tracking, and portfolio management.
Verdigris adds a detection layer that captures what happens between those readings. Transient stress events, harmonic degradation, and sub-cycle anomalies occur at millisecond scale. At 8 kHz (8,000 samples per second), Verdigris captures them. Your existing tools keep working. Verdigris adds waveform-level fault intelligence.
In a deployment across 800+ UPS rectifiers, Verdigris detected active electrical degradation in 4% of the fleet. Zero standard alarms had fired for any of those units.
Works with your panel infrastructure
Verdigris EV2 sensors install non-invasively alongside your existing electrical panels, regardless of manufacturer. Clamp-on CTs capture 8 kHz waveform data per circuit. No rewiring. No downtime. No changes to your existing 1 Hz metering.
| Your Infrastructure | What It Captures | What Verdigris Adds |
|---|---|---|
| Schneider PowerLogic | Steady-state load, phase balance, basic PQ at 1s intervals | 8 kHz transient detection, harmonic THD analysis, predictive health scores |
| Eaton EPMS | Consumption monitoring, load balancing, demand tracking | Sub-cycle anomaly detection, 5th/7th harmonic THD scoring |
| Siemens SENTRON | Circuit-level metering, power quality compliance | Continuous 8 kHz waveform analysis, early degradation warning |
Both sensor systems operate independently. Verdigris reads existing CT feeds without interfering with your panel monitoring. Your steady-state data stays intact. Verdigris adds the 8 kHz detection intelligence that 1-second polling intervals were not designed to capture.
Vendor integration guides
Deployment guides for the monitoring stack you already run:
- Verdigris + Schneider Electric: 8 kHz waveform capture alongside EcoStruxure and PowerLogic
- Verdigris + Eaton: continuous condition monitoring with Brightlayer and PredictPulse
- Verdigris + Siemens: circuit-level fault detection on critical power paths
- Verdigris + ABB: proven integration with Ekip Smart Fit
- Verdigris + Honeywell: early warning alongside Forge and your BMS
- Verdigris + Vertiv: waveform analysis for Liebert and Environet fleets
Feeds your existing dashboards
Verdigris pushes fault and anomaly alerts directly into the tools your team already uses. No new dashboards to learn, no extra screens to watch.
DCIM Platforms
Push sub-second fault detection and harmonic analysis into Nlyte, Sunbird, or Schneider EcoStruxure IT via REST API. Your DCIM gets 8 kHz waveform-derived health scores without changing how your team works.
Observability and Monitoring
Export 8 kHz-derived metrics and alerts to Grafana, Prometheus, Datadog, or Splunk. If your platform team already has a monitoring stack, Verdigris feeds it directly with real-time fault and anomaly data.
Ticketing and Workflows
Route fault detection alerts into ServiceNow, PagerDuty, or your existing ticketing system. When Verdigris detects equipment degradation, a work order appears in the system your team already uses. Alert latency from anomaly to notification: less than 30 seconds.
Integration validated by Aligned Data Centers
Deployment in hours, not months
Verdigris sensors install alongside existing panels with zero infrastructure changes:
- Install sensors. Non-invasive clamp-on CT sensors mount on existing circuit wiring in minutes per panel.
- Connect to cloud. Secure cellular or Ethernet backhaul, no firewall changes required.
- Configure integrations. API keys connect to your existing DCIM, Grafana, or ServiceNow instance.
- Start detecting. Verdigris Signals appear in your existing workflows within hours of installation.
No BMS reconfiguration. No system downtime. No vendor lock-in. Start with a single row or panel, expand at your pace.
API-first architecture
Every Verdigris detection event is available through a documented REST API:
- Real-time data: equipment health scores, anomaly detections, harmonic THD analysis
- Historical data: full 8 kHz waveform archives for forensic analysis
- Webhooks: push notifications for fault and anomaly events to any endpoint
- Bulk export: CSV and JSON waveform archives for data science and custom analytics
Build custom integrations, feed waveform data into data lakes, or connect to tools we have not anticipated yet. Your data, your way.
Ready to learn more?
See how Verdigris can help your data center operations.